All systems

Broadcast systems | Freedom

Quartz Systems

  • High traction coefficient for wet and high-torque areas.
  • Superior durability and impact resistance in demanding heavy-traffic environments.
  • Interior or exterior use, with a wide assortment of custom finishes.
  • Rapid return to service with a polyaspartic build.
Textured double-broadcast quartz floor on a parking garage ramp

Top to bottom

System build

  1. 6Layer 6:

    TopcoatOptional

    Clear topcoat

    • Seals the quartz and lets you tune the texture and sheen.
    Application
    14 mils
    Coverage
    115 sq.ft./gal
  2. 5Layer 5:

    Second broadcast

    Coloured quartz aggregate

    • Final quartz broadcast that builds the textured, high-traction surface.
    Application
    ½ lb / sq.ft
  3. 4Layer 4:

    Second coat

    Epoxy or polyaspartic

    • Locks in the first broadcast and receives the second.
    Application
    14 mils
    Coverage
    115 sq.ft./gal
  4. 3Layer 3:

    First broadcast

    Coloured quartz aggregate

    • Broadcast to refusal into the wet base coat.
    Application
    1 lb / sq.ft
  5. 2Layer 2:

    Base coat

    Epoxy or polyaspartic

    • Epoxy or polyaspartic base coat that receives the first quartz broadcast.
    Application
    8 mils
    Coverage
    200 sq.ft./gal
  6. 1Layer 1:

    Concrete substrate

    Mechanical prep

    • Clean the slab and profile with BLASTRAC, sand blasting, water blasting or a diamond grinder with 30 grit or coarser.
    • Remove all oils and fats. Check chloride, moisture and pH levels before application. Do not apply to wet substrates.
    • New concrete must cure for at least 30 days, with laitance removed and a primer applied to reduce out-gassing.
    Application
    30 grit or coarser
Recommended thickness by resin
LayerFT-100PP-HFASTPlatinum 100
Base coat8 mils10 mils10 mils
Broadcast1 lb / sq.ft1 lb / sq.ft1 lb / sq.ft
Second coat14 mils12 mils12 mils
Broadcast½ lb / sq.ft½ lb / sq.ft½ lb / sq.ft
Topcoat(optional)14 mils14 mils14 mils

Popular applications

  • Parking garages
  • Turning lanes and ramps
  • Exterior walkways
  • Commercial kitchens
  • Veterinary clinics
  • Locker rooms
  • Restrooms

Cured system properties

Coefficient of friction (ASTM C-1028)
Dry 1.16 / Wet 0.89
Hardness (ASTM D 2240)
74
Abrasion resistance (ASTM D-4060, mg loss)
22–28
Tensile strength (ASTM D-638, D-2370)
4,500–5,000 psi
Substrate adhesion (ASTM D-4541)
400–500+ psi, concrete fracture
Flammability (ASTM D-635)
Self extinguishing
  • Substrate temperature must be 5.5°F (3°C) above dew point, with substrate moisture under 4% when coating is applied.
  • Protect from humidity, condensation and water during the 24 hour initial cure.
  • Avoid exterior use on substrates at ground level. Epoxy builds may discolour with regular UV exposure.

In stock at BC Epoxy Depot

Products in this system

  • BCE-CR-JOINT

    2 x 600 ml

    Polyurea Joint Filler

    Semi-rigid filler for control joints and cracks.

    Retail$68.00

    18 in stock

  • BCE-CR-PATCH

    20 kg bag

    Rapid-Set Patch Mortar

    Structural repair mortar, walkable in 30 minutes.

    Retail$54.00

    30 in stock

  • BCE-EPPR-1G

    1.5 gal kit

    Moisture-Tolerant Epoxy Primer

    Penetrating primer for green or damp concrete.

    Retail$164.00

    30 in stock

  • BCE-EP100-3G

    3 gal kit

    EP-100 100% Solids Epoxy

    High-build body coat for garage and commercial floors.

    Retail$289.00

    20 in stock

  • BCE-PA85-2G

    2 gal kit

    PA-85 Polyaspartic Topcoat

    UV-stable, fast-cure clear topcoat. Return to service in 24h.

    Retail$342.00

    47 in stock

  • BCE-QTZ-50

    50 lb bag

    Coloured Quartz Aggregate

    Broadcast quartz for high-traction double-broadcast systems.

    Retail$68.00

    57 in stock